Home / Article / Home Idea
Home Idea
Home / Home Idea

Soffit Lathed Ceiling, External Lathed Ceiling, Decorating Wood Wall from PD WOOD

Line

Soffit Lathed Ceiling, External Lathed Ceiling, Decorating Wood Wall from PD WOOD

Line
 

Lathed ceiling Model PWS65
WPC (WOOD PLASTIC COMPOSITE) is made from 70% plastic powder and 30% of wood powder or wood fiber. The method of production is to extrude the material into the desired shape, though injection molding is also used. WPC has a color, a texture and a beauty of natural wood. It is strong and stiff, does not corrode, resistant to rot or decay and termite. It can be exposed to water and moisture, lighter than natural wood and easy to install and is also an environmentally friendly material. WPC is used for exterior decoration, soffit ceiling and external ceiling.
 

Outstanding Properties
*Easy to install
* Good for exterior use
* Resistant to all kind of weather
*Resistant to marine and marine borers
* Strong and stiff
* Long life span
* Natural wood color and texture
* Flame retardant
*Light weight
* Can be painted



Maintenance
WPC is easy for maintenance because it is resistant to rot and decay, not shrink or swell and the paint is not peeled off. The paint will be fade if exposed directly to UV, but it can be repainted.
 

Product Name: Lathed Ceiling Model PWS 65
Size : 12x65 mm.
Length : 3 m.
Quanity per Sq.m. : 47 pieces
Remark : 5 % spare

 

Installation of soffit lathed ceiling
1. Install the C-line frame at every one-meter interval to hold the panel locker (specific frame).
2. Install nylon netting to the frame to protect from insects.
3. Install panel lockers with the C-line frame at 0.40-meter intervals and set the lock claw to the same position on each line.
4. Install the right-angle trim at the head of the panel and on the eaves at the specified level.
5. Install the WPC panel to the lock claw ensuring both sides of the heads of the panels are placed on the right-angle trim (no screws required).
6. Clean and seal with acrylic between the right-angle trim and the wall and between the right-angle trim and the eaves. (When the panels are installed, the space between each panel will be exactly 1cm.)


Recommendation
Lathed soffit ceiling should be placed croswise, if the panel is placed lengthwise, it will be in a fraction (if the soffit is not parallel)
And there will be a joint at every 3 meters interval. It will be discontinuous and doesn’t look nice.